Skip to product information
1 of 1

Lee Precision 257 Roberts Factory Crimp Die

Lee Precision 257 Roberts Factory Crimp Die

Regular price €21,00 EUR
Regular price Sale price €21,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

SKU:LEE.90835

In stock

Quantity
4.9/5 on Trustpilot · over 1,000 reviews

Lee Precision Factory Crimp Die 257 Roberts

The Lee Precision Factory Crimp Die in 257 Roberts caliber is a die dedicated solely to crimping the round, to be mounted as a separate station after the seating die. Separating bullet seating from crimping allows both operations to be adjusted independently and is the common choice for those who reload rifle cartridges for hunting and target shooting, where the round must withstand recoil, the feeding cycle from the magazine, and handling.

The die works with a collet system: steel segments close radially on the case neck and secure the round to the bullet with pressure distributed around the entire circumference. Because the crimp is created by the closing of the collet and not by contact between the case mouth and the die mouth, the result remains repeatable even when cases are not all the same length, unlike the roll crimp obtained with a seating die. Lee states that a firm crimp raises the bullet's starting pressure, makes the pressure curve more uniform, and reduces velocity dispersion, and that the system works even with bullets lacking a cannelure. Lee also indicates this same die for the 257 Ackley Improved.

Main features

  • Collet-style crimp-only die for rifle cartridges
  • Caliber: 257 Roberts
  • Uniform crimp around the entire circumference of the neck
  • Repeatable result even with cases of non-uniform length
  • Effective even with bullets without a cannelure or crimp groove
  • 7/8"-14 threaded body, standard for reloading presses
  • Crimp intensity adjustable by screwing in the die body

Recommended use

It screws onto any reloading press with a standard 7/8"-14 thread, including Lee single-stage, turret, and progressive presses. It should be used as a standalone station, after adjusting the seating die so that it does not crimp: the bullet is first seated to the desired depth and then crimped in a dedicated pass.

Package contents

The package contains the Factory Crimp Die complete with a Spline Drive lock ring and operating instructions. The shell holder, resizing die, and seating die are not included; these are part of Lee die sets or must be purchased separately.

Manufacturer code: 90835

View full details

Questions about Lee Precision 257 Roberts Factory Crimp Die?