Lee Precision EZ X Expander 30 CAL MED – 308 Winchester (7.62 NATO)
The Lee Precision EZ X Expander is the decapping-expander rod that operates inside Lee full-length resizing dies: in a single press stroke, it extracts the spent primer and expands the case neck to the dimension necessary for bullet seating. This version, designated by Lee as EZ X EXP 30 CAL MED, is designed for 308 Winchester (7.62 NATO), 300 Savage, 30-40 Krag, 7.5x54 French MAS, 7.62x54R, 300 WSM and is the replacement part to order when the decapping pin bends or breaks, a common occurrence with cases featuring crimped primers.
It consists of a single steel rod: the tip serves as the decapping pin, while the intermediate bulge — the .307" expander ball — internally resizes the neck as the case is withdrawn from the die. The total length specified by Lee is 3.370". Lee offers the same .307" diameter on rods of different lengths — 3.370" for medium cases, 3.620" for the 30-06 class, and 3.960" for large-capacity magnums — therefore, it is the case length, not just the bullet diameter, that determines which rod to order. In the Lee full-length die exploded view, the rod is held in the die body by the decapper clamp (code SD2151) and the O-ring (code SD2153), both of which are separate replacement parts.
Main features
- Lee designation: EZ X EXP 30 CAL MED
- Expander diameter: .307"
- Total length: 3.370"
- Dual function: neck expansion and decapping in a single operation
- Quantity specified by Lee: 1 piece per resizing die
- Calibers indicated by Lee: 308 Winchester (7.62 NATO), 300 Savage, 30-40 Krag, 7.5x54 French MAS, 7.62x54R, 300 WSM
Recommended use
Replacement part for Lee full-length resizing dies in 308 Winchester (7.62 NATO), 300 Savage, 30-40 Krag, 7.5x54 French MAS, 7.62x54R, 300 WSM calibers. Lee classifies it among the 308 Winchester full-length die replacement parts. The rod is removed from the die body by loosening the locking clamp and must be reinstalled maintaining alignment with the case flash hole.
Package contents
The replacement part is supplied individually and includes only the decapping-expander rod. The die body, locking clamp (SD2151), and O-ring (SD2153) are not included, as Lee lists them as separate spare parts.
Manufacturer code: SE2169