Lee Precision 2-die set Collet Neck Sizer 6.5x55 Swedish Mauser

Lee Precision Collet 2-Die Neck Sizer Set 6.5x55 Swedish Mauser

Lee Precision two-die set for precision reloading of the 6.5x55 Swedish Mauser caliber: includes the Collet Neck Sizing Die, which resizes only the case neck, and the seating die for bullet insertion. It is the preferred configuration for those reloading brass fired in their own firearm who seek maximum concentricity with minimal case work.

The collet die squeezes the neck against a precision mandrel: the case body and shoulder remain untouched, preserving the fit achieved in the firearm's chamber, with reduced runout, uniform bullet tension, and longer case life. The process does not require lubrication, thus eliminating the case lubing and subsequent cleaning stage. The seating die adjusts the bullet seating depth; in current Lee production, this set is cataloged as the Micrometer Neck Sizing 2-Die Set and features a micrometer seating die with a floating bullet guide. Because the case body is not resized, cartridges produced with this set must be used in the same firearm in which the cases were fired.

Main features

• Two-die set for 6.5x55 Swedish Mauser caliber
• Collet Neck Sizing Die: resizes only the neck, without lubricant
• Adjustable seating die for bullet depth
• Reduces runout and extends case life
• Standard 7/8"-14 threading for common reloading presses

Recommended use

Recommended use

Indicated for precision reloading of 6.5x55 for bolt-action rifles and Swedish Mausers, using brass already fired in the same firearm. For mixed-source brass or cartridges intended for multiple firearms, a set with a full-length resizing die is required instead.

Package contents

• Collet Neck Sizing Die
• Seating die
• Caliber-specific shell holder
• Powder dipper
• Instructions with Lee load data

The full-length resizing die and Factory Crimp Die are not included, nor are the press, cases, primers, powder, or bullets.

Manufacturer code: 90712