Lee Precision Collet 2-Die Neck Sizer Set 308 Winchester
Set of two Lee Precision dies for precision reloading of the .308 Winchester caliber: includes the Collet Neck Sizing Die, which resizes only the case neck, and the seating die for bullet insertion. It is the preferred configuration for those who reload brass fired in their own firearm and seek maximum concentricity with minimal case processing.
The collet die squeezes the neck against a precision mandrel: the case body and shoulder remain untouched, maintaining the fit achieved in the firearm's chamber, with reduced runout, uniform bullet tension, and longer case life. The process requires no lubrication, thus eliminating the case lubrication and subsequent cleaning phase. The seating die adjusts the bullet seating depth; in current Lee production, the set is cataloged as a Micrometer Neck Sizing 2-Die Set and features a micrometer seating die with a floating bullet guide. Because the case body is not resized, cartridges produced with this set must be used in the same firearm in which the cases were originally fired.
Main features
Set of two dies for .308 Winchester caliber
Collet Neck Sizing Die: resizes only the neck, without lubricant
Adjustable seating die for bullet depth
Reduces runout and extends case life
Standard 7/8"-14 thread for common reloading presses
Recommended use
Suitable for precision reloading of .308 Winchester for bolt-action target and hunting rifles, using cases already fired in the same firearm. For mixed-source brass or semi-automatic weapons, a set with a full-length resizing die is required instead.
Package contents
Collet Neck Sizing Die
Seating die
Caliber-specific shell holder
Powder dipper
Instructions with Lee loading data
The full-length resizing die and Factory Crimp Die are not included, nor are the press, cases, primers, powder, or bullets.