Lee Precision Carbide Sizing Die 38 Special / 357 Magnum
Lee Precision Carbide Sizing Die 38 Special / 357 Magnum
SKU:LEE.90530
In stock
Couldn't load pickup availability
- Shipping: Italy €12,00 · EU €29,00 · other countries at checkout
- 14-day right of withdrawal for consumers
- Secure payment: PayPal, credit card, bank transfer · no surcharge for PayPal or card
Lee Precision Carbide Sizing Die 38 Special / 357 Magnum
The Lee Precision Carbide Sizing Die in 38 Special, 357 Magnum, 38 Short Colt, and 38 Long Colt is the single die that performs the first operation of the reloading cycle: it returns the case to the correct dimensions and removes the spent primer. It is the resizing die to be purchased separately to complete a die set, replace a worn component, or set up a second press without buying an entire die set.
The internal tungsten carbide ring works the case wall without steel-on-brass contact; therefore, for straight-walled cases, lubrication is not necessary, eliminating the subsequent degreasing phase and significantly reducing die wear. Compared to a steel resizing die, which requires the use of case lube, the carbide die is the fastest and cleanest solution for high-volume reloading of pistol and revolver ammunition. The body is threaded 7/8"-14, the standard adopted by Lee and almost all reloading presses.
Main features
- Single resizing die with carbide ring
- Caliber: 38 Special, 357 Magnum, 38 Short Colt, and 38 Long Colt
- Does not require case lubrication
- Performs resizing and decapping simultaneously
- Standard 7/8"-14 thread
- Also covers 38 Short Colt and 38 Long Colt
Recommended use
It screws into any reloading press with 7/8"-14 threading, whether single-stage, turret, or progressive. It must be mounted in the first station and adjusted according to the Lee Precision instructions. To complete the cycle, the expansion/charging and seating dies, as well as the shell holder corresponding to the caliber, are required and must be purchased separately.
Package contents
One carbide resizing die with decapping rod. The other dies in the set, the shell holder, and any accessories shown are not included.
Manufacturer code: 90530
Share
