The Lee Precision Carbide 3-Die Set is a complete die set for reloading the 38 Smith & Wesson cartridge, a revolver caliber popular among collectors and shooters of historical service weapons. It includes the three dies that cover the entire reloading cycle: resizing of the case with decapping, mouth flaring with powder charging, and bullet seating with crimping. The set is ready to use and already includes a shell holder and a powder measure.
The full-length resizing die features a tungsten carbide ring: the surface in contact with the case does not wear out and does not require lubricant, eliminating both the lubrication and the subsequent degreasing of the cases. The second die is a Powder Through Expanding Die, which flares the case mouth and simultaneously acts as a conduit for the powder, allowing the powder measure to be mounted directly on top of the die. The third die seats the bullet and applies the roll crimp in the same press stroke, a solution suitable for the bullets with a crimp groove typical of revolver calibers.
Main features
Three-die set for the 38 S&W caliber
Full-length resizing die with carbide insert and integrated decapper
Lubricant-free resizing thanks to the carbide ring
Powder Through Expanding Die for case mouth flaring and powder charging
Seating die with integrated crimping and fine adjustment of the overall length
Standard 7/8"-14 thread
Lee locking rings with O-ring, which maintain the setting between sessions
Recommended use
The set is intended exclusively for the 38 S&W and should not be confused with the 38 Special, a longer cartridge with a different diameter that requires a dedicated set. It mounts on any reloading press with a standard 7/8"-14 threaded connection, the format adopted by Lee single-stage, turret, and progressive presses, as well as most presses from other manufacturers.
Package contents
Full-length carbide resizing die
Powder Through Expanding Die
Seating die for bullet insertion
Universal shell holder
Powder dipper
Instructions with reloading data table
The Factory Crimp Die, the press, the powder measure, and the cartridge components (cases, primers, powder, and bullets) are not included.