Hornady .336 Match Grade neck bushing for .30 caliber
The Hornady .336 Match Grade Bushing is the neck sizing bushing for Hornady Match Grade Bushing Dies, belonging to the series for .30 caliber. When inserted into the die, it resizes the case neck to exactly .336", allowing you to choose the neck tension on the bullet.
Interchangeable bushings prevent over-working the neck and subsequent re-expanding, which reduces brass stress and improves concentricity and case life. The bushings are self-centering: the die cap allows them to float so they align with the neck. Hornady produces them in .001" increments, allowing for precise tension adjustment.
Main features
Type: neck sizing bushing
Inner diameter: .336"
Series: .30 caliber
Self-centering in Match Grade dies
Hornady range available in .001" increments
Recommended use
To be installed in Hornady Match Grade full length or neck size bushing dies, sold separately. To choose the size, Hornady recommends measuring the outside diameter of a loaded cartridge neck and subtracting .002-.003" (depending on the desired tension); it is advisable to also have the bushings one size above and below.