DPM recoil reduction system for Walther PDP 4.5″ and 5″ 18 settings

DPM Recoil Reduction System for Walther PDP 4.5″ and 5″

The DPM MS-WA-10 system replaces the original recoil rod of the Walther PDP with a 4.5″ and 5″ barrel, for both steel and polymer frames. The eighteen available combinations make it suitable for shooters who want to precisely calibrate the slide behavior according to the ammunition used.

Its operation is based on the patented DPM multi-spring recoil rod: three coaxial springs of increasing tension work within the rod, and the third internal spring only engages in the final stage of the slide travel, ensuring it never strikes the frame. The three external springs combine with six buffer springs divided into two sets: the Soft set with 0.7 mm wire produces 8, 9, and 10 kg (17, 20, and 22 lb), while the Heavy set with 0.8 mm wire reaches 8.5, 9.5, and 10.5 kg (18.7, 21, and 23 lb).

Main Features

• Compatible with Walther PDP Full Size 5.1″ and PDP Pro SD, steel and polymer frame
• Not compatible with the 4″ barrel version or the PDP Pro SD 4.6″
• 18 settings achieved by combining external springs and buffer springs
• Soft series, 0.7 mm wire: 8 kg / 17 lb, 9 kg / 20 lb, 10 kg / 22 lb
• Heavy series, 0.8 mm wire: 8.5 kg / 18.7 lb, 9.5 kg / 21 lb, 10.5 kg / 23 lb
• Made in Greece (EU)

Recommended Use

Direct replacement for the stock recoil rod, with no modifications to the firearm. The Soft series is recommended for underpowered ammunition, while the Heavy series is for more energetic factory loads.

Package Contents

• 3 external springs
• 6 buffer springs
• 1 washer
• 1 safety pin

Manufacturer SKU: MS-WA-10