The powder bar is the sliding metering bar for the Dillon powder measure: with every press cycle, it slides under the reservoir, fills with powder, and discharges it into the case. The cavity machined into the bar determines the dispensed volume, which is why the powder bar is selected based on the charge range intended to be dispensed.
This is the Magnum Rifle version of the Dillon range, the bar with the largest volume cavity, designed for the higher-volume charges typical of rifle cartridges. Replacing the powder bar is a powder measure conversion operation and does not require removing the assembly from the toolhead.
Main features
Type: powder bar for Dillon powder measure
Version: Magnum Rifle
Function: defines the volume of powder dispensed with each cycle
Interchangeable component of the powder measure assembly
Recommended use
It is mounted on the Dillon powder measure to replace the bar currently in use when the required charge range exceeds that covered by the installed powder bar. Always verify the dispensed charge with a scale before starting production.