The bullet seating die is the die that pushes the bullet into the case neck of the primed case, setting it to the desired depth and thus the target overall cartridge length. This version works with the 9mm Luger caliber.
Adjustment is performed via the seating stem, which is screwed in or out to vary the seating depth: in the Dillon range, the stem is a separate component, allowing it to be chosen based on the bullet profile in use. On Dillon presses, crimping is handled by a separate die, which allows for independent adjustment of seating depth and case mouth crimping. Dillon manufactures its own pistol carbide dies in the United States, hand-crafting them from sintered carbide and hand-polishing them to tight dimensional specifications. The manufacturer specifies that these dies are not compatible with the Square Deal B press, which uses proprietary components.
Main features
Type: bullet seating die
Caliber: 9mm Luger
Depth adjustment via seating stem
Crimping handled by a separate die
Single die, not a complete set
Recommended use
Mounts on the Dillon progressive press toolhead at the bullet seating station for the 9mm Luger caliber. Dillon expressly states that these dies are not compatible with the Square Deal B, which requires dedicated dies.