Armanov #5 shellplate with case retainer spring for Dillon XL650 and XL750 – 9x19, 9x21, .38 Super
The Armanov shellplate with Case Retainer Spring for Dillon XL650 and XL750 is a shellplate with an integrated case retainer spring: a milled groove houses the spring, which is secured to the Dillon frame and holds the cases in position during the press cycle. This #5 version (Dillon ref. 13509) is intended for 9x19, 9x21, and .38 Super.
The spring is universal, so locator buttons are no longer needed, and it allows you to remove and reinsert a case in its station for a quick check of OAL or powder charge. The shellplate is made of hardened and tempered A2 steel with a blued finish; milled channels on the underside collect and evacuate powder and debris.
Main features
Anti-wobble case retainer spring
No locator buttons required
Hardened and tempered A2 tool steel, blued finish
Underside channels for powder and debris evacuation
Rapid case inspection during reloading
#5 shellplate – Dillon ref. 13509
Recommended use
For Dillon XL650 and XL750 presses configured for 9x19, 9x21, and .38 Super. If spring tension hinders proper indexing, the manufacturer recommends adjusting the index cam block to allow for greater rotation; pairing with a Primer Depth Stop cam block is recommended.
Package contents
1 shellplate for Dillon XL650/XL750
1 pack of case retainer springs for Dillon XL650 and XL750
Not included: replacement spring kit (sold separately).