Leupold Mark 4 35mm Medium Aluminum Rings Matte Black

Leupold Mark 4 35 mm Medium Matte Black Aluminum Rings

Leupold Mark 4 35 mm medium-height rings are a pair of aluminum rings with a cross-slot mount for Picatinny rails, designed for 35 mm tube riflescopes on precision and long-range rifles.

Leupold specifies tight machining tolerances on the cross-slot profile for the Mark 4 series: the keeper clamp tightens to 65 in-lb, the highest value among the rings in the catalog, while the top screws should be tightened to 28 in-lb. The height is 0.9″, approximately 22.9 mm from the base surface to the center of the ring, a measurement to be compared with the objective lens diameter and any MOA inclination of the base. Matte black finish.

Main features

• Series: Leupold Mark 4
• Tube diameter: 35 mm
• Height class: medium
• Height from base surface to center of ring: 0.9″, approximately 22.9 mm
• Material: aluminum
• Finish: matte black
• Weight: 3.4 oz, approximately 96 g
• Mount: cross-slot, for Picatinny rail
• Specified torque settings: keeper clamp 65 in-lb, ring top screws 28 in-lb
• Configuration: pair of rings

Recommended use

Mark 4 rings require a Picatinny rail: one or two-piece Mark 4 bases, 20 MOA inclined rails for long-range shooting, or receivers with an integrated rail. They are the consistent choice for scopes with large diameters and mass, where torque holding strength matters more than weight.

Manufacturer code: 178531