Leupold Mark 4 34mm High Aluminum Matte Black Rings

Leupold Mark 4 34 mm High Matte Black Aluminum Rings

The Leupold Mark 4 34 mm high rings are a pair of aluminum rings with a cross-slot mount for Picatinny rails, designed for 34 mm tube riflescopes on precision and long-range rifles.

Leupold specifies tight machining tolerances for the Mark 4 series on the cross-slot profile: the keeper clamp tightens to 65 in-lb, the highest value among the rings in the catalog, while the top screws should be torqued to 28 in-lb. The height is 1.06″, approximately 26.9 mm from the base surface to the center of the ring, a measurement to be compared with the objective diameter and any MOA inclination of the base. Matte black finish.

Main features

• Series: Leupold Mark 4
• Tube diameter: 34 mm
• Height class: high
• Height from base surface to center of ring: 1.06″, approximately 26.9 mm
• Material: aluminum
• Finish: matte black
• Weight: 4.6 oz, approximately 130 g
• Mount: cross-slot, for Picatinny rail
• Specified torque settings: keeper clamp 65 in-lb, top ring screws 28 in-lb
• Configuration: pair of rings

Recommended use

Mark 4 rings require a Picatinny rail: one or two-piece Mark 4 bases, 20 MOA canted rails for long-range shooting, or receivers with an integrated rail. They are the consistent choice for scopes with large diameters and mass, where the hold of the torque setting matters more than weight.

Manufacturer code: 120181