Lee Precision 2-Die Collet Neck Sizer Set 7.5x55 Swiss

Lee Precision Collet 2-Die Neck Sizer Set 7.5x55 Swiss

Lee Precision two-die set for precision reloading of the 7.5x55 Swiss (Schmidt-Rubin, GP11) caliber: includes the Collet Neck Sizing Die, which resizes only the case neck, and the seating die for bullet insertion. It is the preferred configuration for shooters with K31 and Schmidt-Rubin rifles who reload brass fired in their own firearm.

The collet die squeezes the neck against a precision mandrel: the case body and shoulder remain untouched and retain the fit obtained in the firearm's chamber, with reduced runout, uniform bullet tension, and longer case life. The process requires no lubrication and eliminates the case lubrication and cleaning phase. The seating die adjusts the bullet seating depth; in current Lee production, the set is cataloged as a Micrometer Neck Sizing 2-Die Set and features a micrometer seating die with a floating bullet guide. Cartridges produced with this set must be used in the same firearm in which the cases were fired.

Main features

• Two-die set for 7.5x55 Swiss caliber
• Collet Neck Sizing Die: resizes only the neck, without lubricant
• Adjustable seating die for bullet depth
• Reduces runout and extends case life
• Standard 7/8"-14 thread for common reloading presses

Recommended use

Recommended for reloading 7.5x55 Swiss for K31 rifles, Schmidt-Rubin rifles, and carbines chambered in this caliber, using cases already fired in the same firearm. For mixed-source brass, a set with a full-length die is required.

Package contents

• Collet Neck Sizing Die
• Seating die
• Caliber-specific shell holder
• Powder dipper
• Instructions with Lee reloading data

The full-length resizing die and the Factory Crimp Die are not included, nor are the press, cases, primers, powder, or bullets.

Manufacturer code: 90186