{"title":"Tools","description":"\u003ch2\u003eGunsmithing and reloading tools\u003c\/h2\u003e\u003cp\u003eThis collection gathers tools useful for assembling, disassembling, and maintaining firearms and reloading equipment: punch sets, gunsmithing hammers, torque wrenches, bench blocks, measuring instruments, and case trimmer replacement parts. Brands included are Real Avid, Wheeler Engineering, R2 USA, M•CARBO, Lee Precision, RCBS, and Lyman.\u003c\/p\u003e\u003ch3\u003eHow to choose\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eTask to perform:\u003c\/strong\u003e for pins and dowels, you need punches of the correct diameter; for mount and base screws, a torque wrench is recommended.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e brass or nylon tips reduce the risk of marring firearm surfaces.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e blocks, vises, and spare parts are often platform-specific (AR15, Glock, 1911) or specific to a trimmer model: check the product page.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cdiv class=\"collezioni-correlate\"\u003e\n\n\u003ch3\u003eYou might also be interested in\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/collections\/utensileria-per-armi\"\u003eGunsmithing tools\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/collections\/chiavi\"\u003eWrenches and tools\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/collections\/banchi-pulizia-armi\"\u003eCleaning benches and mats\u003c\/a\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003ca href=\"\/en\/collections\/tornitura-bossoli\"\u003eCase trimming and turning\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e","products":[{"product_id":"lee-precision-case-length-gage-and-shellholder-222-remington","title":"Lee Precision Case Length Gage with shellholder 222 Remington 90113","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 222 Remington 90113\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the gage and shellholder assembly that Lee Precision uses to trim cases to length and square the case mouth. This version is dedicated to the \u003cstrong\u003e222 Remington\u003c\/strong\u003e: the gage mechanically determines the travel of the cutting tool, so the final length does not depend on adjustments or operator readings and is identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder and the cutter rests on the gage: the cut stops automatically when the case reaches the specified dimension, between 1.680 and 1.700 inches for the 222 Remington. The result is a case mouth perfectly perpendicular to the axis of the case, a condition that affects the consistency of the crimp and bullet retention. The system is purely mechanical and requires no maintenance or calibration.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 222 Remington\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 1.680 and 1.700 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable dimension across the entire batch\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eUse in conjunction with the Cutter and Lock Stud, the Cutter with Ball Grip and Lock Stud, or the Deluxe Case Conditioning Kit. After trimming, it is advisable to chamfer and deburr the case neck with the Lee Chamfer Tool.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 222 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90113\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102501723,"sku":"LEE.90113","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1e5fee1a-f2e7-4c53-8c70-33c53c32fb07.jpg?v=1775468194"},{"product_id":"lee-precision-case-length-gage-and-shellholder-22-hornet","title":"Lee Precision Case Length Gage with shellholder 22 Hornet 90111","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 22 Hornet 90111\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the gage and shellholder assembly that Lee Precision uses to trim cases to length and square the case mouth. This version is designed for the \u003cstrong\u003e22 Hornet\u003c\/strong\u003e: the gage mechanically determines the travel of the cutting tool, so the final length does not depend on operator adjustments or readings and is identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder and the cutter rests on the gage: the cut stops automatically when the case reaches the specified length, between 1.383 and 1.403 inches for the 22 Hornet. The 22 Hornet has thin walls and a delicate neck, so a squared mouth and uniform length have a direct impact on crimp consistency and bullet retention. This assembly cannot be used on the 22 K Hornet, which requires a custom gage.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase length gage and shellholder dedicated to the 22 Hornet\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 1.383 and 1.403 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable dimension across the entire batch\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eNot compatible with the 22 K Hornet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\np\u0026gt;Used in conjunction with the Cutter and Lock Stud, the Cutter with Ball Grip and Lock Stud, or the Deluxe Case Conditioning Kit. After trimming, it is advisable to chamfer and deburr the neck with the Lee Chamfer Tool.\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 22 Hornet\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90111\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102534491,"sku":"LEE.90111","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_ba317d18-92aa-48af-8088-adb0a25bfd9e.jpg?v=1775468193"},{"product_id":"lee-precision-case-length-gage-and-shellholder-223-remington","title":"Lee Precision Case Length Gage with shellholder 223 Remington 90114","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 223 Remington 90114\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e223 Remington\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 223 Remington is between 1.730 and 1.760 inches. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from bumping in the chamber and maintains a constant crimp. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to 223 Remington\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 1.730 and 1.760 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 223 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90114\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102665563,"sku":"LEE.90114","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_954eaeeb-85bc-4a3e-b6be-86f488be3ee2.jpg?v=1775468197"},{"product_id":"lee-precision-case-length-gage-and-shellholder-220-swift","title":"Lee Precision Case Length Gage with shellholder 220 Swift 90118","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 220 Swift 90118\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a combined unit consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to length and square the mouth. This unit is designed for the \u003cstrong\u003e220 Swift\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 220 Swift is between 2.185 and 2.205 inches. The unit acts as a go\/no-go gage: if the case is not trimmed, it means it is already within limits. Lee specifies a tolerance for these units of +.000\/-.015 inches. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from bumping against the chamber and maintains consistent crimping. The mouth results perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 220 Swift\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.185 and 2.205 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 220 Swift\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90118\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102698331,"sku":"LEE.90118","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_fc06f66e-ef95-4ebb-a4f5-cb9cdf9028e1.jpg?v=1775468198"},{"product_id":"lee-precision-case-length-gage-and-shellholder-22-250-remington","title":"Lee Precision Case Length Gage with shellholder 22-250 Remington 90116","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 22-250 Remington 90116\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of a length gage and dedicated shell holder used by Lee Precision to trim cases to length and square the case mouth. This unit works with the \u003cstrong\u003e22-250 Remington\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 22-250 Remington is between 1.892 and 1.912 inches. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has elongated: returning it to the correct length prevents the mouth from bumping against the cartridge chamber and keeps crimping consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shell holder dedicated to the 22-250 Remington\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 1.892 and 1.912 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: consistent length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 22-250 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90116\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102829403,"sku":"LEE.90116","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_8d8c48b9-ff9a-4911-a9dc-bd9aa7f94778.jpg?v=1775468201"},{"product_id":"lee-precision-case-length-gage-and-shellholder-243-winchester","title":"Lee Precision Case Length Gage with shellholder 243 Winchester 90119","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 243 Winchester 90119\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder that Lee Precision uses to trim cases to size and square their mouths. This unit works for the \u003cstrong\u003e243 Winchester\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 243 Winchester is between 2.025 and 2.045 inches. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has lengthened: returning it to size prevents the mouth from bottoming out in the cartridge chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 243 Winchester\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.025 and 2.045 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter of less than .475 inches—and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 243 Winchester\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90119\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102862171,"sku":"LEE.90119","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_3108af08-afce-41e5-92ec-ad356bca5e34.jpg?v=1775468202"},{"product_id":"lee-precision-case-length-gage-and-shellholder-243-winchester-super-short-magnum-wssm","title":"Lee Precision Case Length Gage with shellholder 243 WSSM 90389","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 243 WSSM 90389\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e243 WSSM\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length, which for the 243 WSSM is between 1.650 and 1.670 inches. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from jamming in the cartridge chamber and keeps crimping consistent. The case mouth ends up perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires neither calibration nor maintenance. Lee lists this code under the name 243 WSSM (243 Winchester Super Short Magnum).\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 243 WSSM\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 1.650 and 1.670 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already sized\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the case mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 243 WSSM\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90389\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102960475,"sku":"LEE.90389","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_ffea1127-dea2-4a36-ab94-66afbd475890.jpg?v=1775468205"},{"product_id":"lee-precision-case-length-gage-and-shellholder-25-06-remington","title":"Lee Precision Case Length Gage with shellholder 25-06 Remington 90124","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 25-06 Remington 90124\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit works for the \u003cstrong\u003e25-06 Remington\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 25-06 Remington is between 2.474 and 2.494 inches. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the case mouth from hitting the chamber and keeps the crimp consistent. The case mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 25-06 Remington\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.474 and 2.494 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already sized\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the case mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 25-06 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90124\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506102993243,"sku":"LEE.90124","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_7e8e456d-7c39-4056-9072-49fafb9229a2.jpg?v=1775468206"},{"product_id":"lee-precision-case-length-gage-and-shellholder-6-5x52-carcano","title":"Lee Precision Case Length Gage with Shellholder 6.5x52 Carcano 90043","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 6.5x52 Carcano 90043\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e6.5x52 Carcano\u003c\/strong\u003e: the trim length is determined by the gage geometry, meaning it does not depend on operator adjustments or readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 6.5x52 Carcano is between 2.047 and 2.067 inches. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from bottoming out in the chamber and maintains a consistent crimp. The case mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 6.5x52 Carcano\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.047 and 2.067 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the case mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 6.5x52 Carcano\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90043\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103124315,"sku":"LEE.90043","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_deaf901c-2694-4379-a1c9-8eea1864e24b.jpg?v=1775468208"},{"product_id":"lee-precision-case-length-gage-and-shellholder-6-5x55mm-swedish-mauser","title":"Lee Precision Case Length Gage with shellholder 6.5x55 Swedish Mauser 90126","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 6.5x55 Swedish Mauser 90126\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works for the \u003cstrong\u003e6.5x55 Swedish Mauser\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 6.5x55 Swedish Mauser is between 2.145 and 2.165 inches. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from bumping against the chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 6.5x55 Swedish Mauser\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.145 and 2.165 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—one is sufficient for all cartridges with a bullet diameter of less than .475 inches—and is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 6.5x55 Swedish Mauser\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90126\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103157083,"sku":"LEE.90126","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_0d333404-8acc-4699-afd0-35adf9221e9b.jpg?v=1775468209"},{"product_id":"lee-precision-case-length-gage-and-shellholder-270-winchester","title":"Lee Precision Case Length Gage with shellholder 270 Winchester 90128","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 270 Winchester 90128\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shell holder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e270 Winchester\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length, which for the 270 Winchester is between 2.520 and 2.540 inches. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000\/-.015 inches. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from contacting the cartridge chamber and keeps the crimp consistent. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shell holder dedicated to the 270 Winchester\u003c\/li\u003e\n\n\u003cli\u003eTrim length between 2.520 and 2.540 inches\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 270 Winchester\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90128\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103255387,"sku":"LEE.90128","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_26aa56b6-cfcd-4073-bd1b-09ef84a26c90.jpg?v=1775468212"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7x57mm-mauser-7mm-mauser","title":"Lee Precision Case Length Gage with shellholder 7x57 Mauser 90130","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7x57 Mauser 90130\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of a length gauge and a dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit is designed for the \u003cstrong\u003e7x57 Mauser\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from bumping against the chamber and keeps the crimp constant. The mouth results perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 7x57 Mauser\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e7x57 Mauser Case Length Gage\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90130\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103320923,"sku":"LEE.90130","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_72de299b-29a5-492c-a2f0-c2d3f5cf6d0c.jpg?v=1775468213"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7mm-08-remington","title":"Lee Precision Case Length Gage with shellholder 7mm-08 Remington 90167","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7mm-08 Remington 90167\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shell holder used by Lee Precision to trim cases to size and square their mouth. This unit works on the \u003cstrong\u003e7mm-08 Remington\u003c\/strong\u003e: the trim length is determined by the gauge's geometry, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from bumping against the cartridge chamber and maintains a constant crimp. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shell holder dedicated to the 7mm-08 Remington\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7mm-08 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90167\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103419227,"sku":"LEE.90167","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_48c6c143-9820-4f51-9013-c8262c97b42c.jpg?v=1775468216"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-remington-magnum","title":"Lee Precision Case Length Gage with Shellholder 7mm Remington Magnum 90131","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7mm Remington Magnum 90131\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e7mm Remington Magnum\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, meaning it does not depend on settings or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from jamming in the chamber and keeps the crimp consistent. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 7mm Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\np\u0026gt;The gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter smaller than .475 inches—and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7mm Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90131\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103451995,"sku":"LEE.90131","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_fa7eb1d8-4c55-42de-ade3-968448408cfe.jpg?v=1775468217"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7x64mm-brenneke","title":"Lee Precision Case Length Gage with shellholder 7x64 Brenneke 90236","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7x64 Brenneke 90236\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a unit consisting of a length gage and a dedicated shellholder that Lee Precision uses to trim cases to length and square the case mouth. This unit works with the \u003cstrong\u003e7x64 Brenneke\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has lengthened; returning it to size prevents the case mouth from contacting the cartridge chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 7x64 Brenneke\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool, sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter smaller than .475 inches—and can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7x64 Brenneke\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90236\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103583067,"sku":"LEE.90236","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_126ee3eb-a1d6-4916-a28d-bc0ae126fe9b.jpg?v=1775468219"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-5-schmidt-rubin-7-5x55-swiss","title":"Lee Precision Case Length Gage with shellholder 7.5x55 Swiss 90132","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7.5x55 Swiss 90132\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the unit consisting of the length gauge and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works for the \u003cstrong\u003e7.5x55 Swiss\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not trimmed, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the case mouth from jamming in the cartridge chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance. Lee lists this product code under the name 7.5 Swiss.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 7.5x55 Swiss\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already at length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7.5x55 Swiss\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90132\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103615835,"sku":"LEE.90132","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_0446cc23-37d5-4f54-852c-dbc6f4098d23.jpg?v=1775468220"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-5x54mm-french-mas","title":"Lee Precision Case Length Gage with shellholder 7.5x54 MAS 90051","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7.5x54 MAS 90051\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a combination unit consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to length and square the mouth. This unit is for the \u003cstrong\u003e7.5x54 MAS\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the case mouth from contacting the cartridge chamber and ensures a consistent crimp. The mouth ends up perpendicular to the case axis, which affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 7.5x54 MAS\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already at the correct length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7.5x54 MAS\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90051\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103714139,"sku":"LEE.90051","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_ddb4691a-02bb-40be-8961-c3897fac3612.jpg?v=1775468223"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-62x39-russian","title":"Lee Precision Case Length Gage with shellholder 7.62x39 Russian 90133","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7.62x39 Russian 90133\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works for the \u003cstrong\u003e7.62x39 Russian\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from bumping into the cartridge chamber and maintains consistent crimping. The mouth results in being perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires neither calibration nor maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 7.62x39 Russian\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop of the cut: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—one is sufficient for all cartridges with a bullet diameter smaller than .475 inches—and is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7.62x39 Russian\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90133\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103746907,"sku":"LEE.90133","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_5cab9293-06e2-42a7-ae28-f642fbce8281.jpg?v=1775468224"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-62x54mm-rimmed-russian-7-62x53mm-rimmed","title":"Lee Precision Case Length Gage with shellholder 7.62x54R Russian 90147","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7.62x54R Russian 90147\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e7.62x54R Russian\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from contacting the chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 7.62x54R Russian\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7.62x54R Russian\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90147\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103877979,"sku":"LEE.90147","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_de056b46-10d0-41d1-8971-7e4b3d323c81.jpg?v=1775468227"},{"product_id":"lee-precision-case-length-gage-and-shellholder-7-65mm-argentine-mauser","title":"Lee Precision Case Length Gage with shellholder 7.65 Argentine Mauser 90134","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 7.65 Argentine Mauser 90134\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shellholder with which Lee Precision trims cases to size and squares their mouth. This unit works on the \u003cstrong\u003e7.65 Argentine Mauser\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from contacting the cartridge chamber and keeps crimping consistent. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 7.65 Argentine Mauser\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 7.65 Argentine Mauser\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90134\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506103910747,"sku":"LEE.90134","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_d9010e6a-e5cf-453b-b1df-10403ea9815b.jpg?v=1775468228"},{"product_id":"lee-precision-case-length-gage-and-shellholder-30-carbine","title":"Lee Precision Case Length Gage with shellholder 30 M1 Carbine 90135","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 30 M1 Carbine 90135\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e30 M1 Carbine\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 30 M1 Carbine, where the length directly affects headspace and the regularity of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 30 M1 Carbine\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 30 M1 Carbine\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90135\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104041819,"sku":"LEE.90135","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_dabf59a2-5aad-4d4e-b484-d16d557bd84c.jpg?v=1775468230"},{"product_id":"lee-precision-case-length-gage-and-shellholder-30-30-winchester","title":"Lee Precision Case Length Gage with shellholder 30-30 Winchester 90136","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 30-30 Winchester 90136\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a set consisting of a length gauge and a dedicated shell holder used by Lee Precision to trim cases to size and square their mouths. This unit is designed for the \u003cstrong\u003e30-30 Winchester\u003c\/strong\u003e: the trim length is determined by the gauge's geometry, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gauge: the cut stops automatically once the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched; returning it to size prevents the mouth from bumping against the chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, which affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shell holder dedicated to the 30-30 Winchester\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: consistent length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not trimmed, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 30-30 Winchester\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90136\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104074587,"sku":"LEE.90136","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_b77a8aaf-80a2-43be-b76a-ddc95c8dc771.jpg?v=1775468232"},{"product_id":"lee-precision-case-length-gage-and-shellholder-300-winchester-short-magnum-wsm","title":"Lee Precision Case Length Gage with shellholder 300 WSM 90034","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 300 WSM 90034\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e300 WSM\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from bumping against the cartridge chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance. Lee lists this item under the designation 300 WSM (300 Winchester Short Magnum).\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 300 WSM\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 300 WSM\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90034\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104172891,"sku":"LEE.90034","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_3ecf18f1-1f85-46b2-8a08-eac27f1c1a00.jpg?v=1775468234"},{"product_id":"lee-precision-case-length-gage-and-shellholder-308-winchester","title":"Lee Precision Case Length Gage with shellholder 308 Winchester 90139","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 308 Winchester 90139\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shellholder that Lee Precision uses to trim cases to size and square their mouths. This unit works on the \u003cstrong\u003e308 Winchester\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from bumping into the chamber and keeps the crimp consistent. The mouth is rendered perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 308 Winchester\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter smaller than .475 inches—and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 308 Winchester\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90139\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104205659,"sku":"LEE.90139","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_51785064-5fb4-43da-8ec5-c47017a3a6c0.jpg?v=1775468236"},{"product_id":"lee-precision-case-length-gage-and-shellholder-30-06-springfiel","title":"Lee Precision 30-06 Springfield Case Length Gage with Shellholder 90140","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 30-06 Springfield 90140\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder used by Lee Precision to trim cases to length and square the case mouth. This unit is designed for the \u003cstrong\u003e30-06 Springfield\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically once the case reaches the specified length. The unit functions as a go\/no-go gauge: if the case is not trimmed, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the mouth from bumping against the chamber and keeps crimping consistent. The case mouth results perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 30-06 Springfield\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; only one is needed for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 30-06 Springfield\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90140\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104336731,"sku":"LEE.90140","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_53862392-89e2-4cfb-bcb7-2c30c0890832.jpg?v=1775468238"},{"product_id":"lee-precision-case-length-gage-and-shellholder-300-aac-blackout","title":"Lee Precision Case Length Gage with shellholder 300 AAC Blackout 90443","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 300 AAC Blackout 90443\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the mouth. This unit works on the \u003cstrong\u003e300 AAC Blackout\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, when the case has elongated: returning it to size prevents the mouth from bumping in the cartridge chamber and keeps the crimp constant. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 300 AAC Blackout\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be combined with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 300 AAC Blackout\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90443\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104369499,"sku":"LEE.90443","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_834bd204-fb38-482c-b8d5-b42ab5ce103e.jpg?v=1775468239"},{"product_id":"lee-precision-case-length-gage-and-shellholder-300-h-h-magnum-300-remington-ultra-magnum","title":"Lee Precision Case Length Gage with shellholder 300 H\u0026H Magnum \/ 300 RUM 90141","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 300 H\u0026amp;H Magnum \/ 300 RUM 90141\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e300 H\u0026amp;H Magnum \/ 300 RUM\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from jamming in the chamber and keeps crimping consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance. The same unit covers the 300 H\u0026amp;H Magnum and the 300 Remington Ultra Magnum, which Lee groups under the same code.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 300 H\u0026amp;H Magnum \/ 300 RUM\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 300 H\u0026amp;H Magnum \/ 300 RUM\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90141\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104566107,"sku":"LEE.90141","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_55649bfa-bfbc-43e8-8a83-1c5ec47fe390.jpg?v=1775468242"},{"product_id":"lee-precision-case-length-gage-and-shellholder-300-winchester-magnum","title":"Lee Precision Case Length Gage with shellholder 300 Winchester Magnum 90142","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 300 Winchester Magnum 90142\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a set consisting of a length gage and a dedicated shellholder, with which Lee Precision trims cases to size and squares the case mouth. This unit works with the \u003cstrong\u003e300 Winchester Magnum\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The set acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, when the case has elongated: returning it to the correct length prevents the case mouth from hitting the chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 300 Winchester Magnum\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 300 Winchester Magnum\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90142\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104598875,"sku":"LEE.90142","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_35d0dc37-b521-4c55-8e9d-ed0c52e5fe60.jpg?v=1775468243"},{"product_id":"lee-precision-case-length-gage-and-shellholder-300-weatherby-magnum","title":"Lee Precision Case Length Gage with shellholder 300 Weatherby Magnum 90143","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 300 Weatherby Magnum 90143\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e300 Weatherby Magnum\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the mouth from bumping against the cartridge chamber and keeps the crimp consistent. The mouth results perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 300 Weatherby Magnum\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 300 Weatherby Magnum\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90143\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104697179,"sku":"LEE.90143","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_6e788f08-d6c0-458c-81b3-57b4c305f7aa.jpg?v=1775468245"},{"product_id":"lee-precision-case-length-gage-and-shellholder-8x57-mauser-8mm-mauser","title":"Lee Precision Case Length Gage with shellholder 8x57 Mauser 90148","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 8x57 Mauser 90148\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder used by Lee Precision to trim cases to length and square the case mouth. This unit works with the \u003cstrong\u003e8x57 Mauser\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct length prevents the case mouth from hitting the chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 8x57 Mauser\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already at the correct length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter smaller than .475 inches—and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 8x57 Mauser\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90148\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104729947,"sku":"LEE.90148","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_74c2c95d-89f3-4d19-b66e-060b45fa45ac.jpg?v=1775468247"},{"product_id":"lee-precision-case-length-gage-and-shellholder-303-british","title":"Lee Precision Case Length Gage with shellholder 303 British 90144","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 303 British 90144\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shellholder that Lee Precision uses to trim cases to length and square the case mouth. This unit works on the \u003cstrong\u003e303 British\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to size prevents the case mouth from bottoming out in the cartridge chamber and keeps the crimp consistent. The mouth is perpendicular to the axis of the case, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 303 British\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 303 British\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90144\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104861019,"sku":"LEE.90144","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_a45ebc5a-cd15-4be2-8e4f-8592c89198b1.jpg?v=1775468249"},{"product_id":"lee-precision-case-length-gage-and-shellholder-35-remington","title":"Lee Precision Case Length Gage with shellholder 35 Remington 90150","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 35 Remington 90150\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e35 Remington\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from contacting the cartridge chamber and keeps the crimp constant. The mouth is perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 35 Remington\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already sized\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal, only one is needed for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 35 Remington\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90150\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506104893787,"sku":"LEE.90150","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_8ba94f03-0118-474a-8ed6-adff74799a77.jpg?v=1775468250"},{"product_id":"lee-precision-case-length-gage-and-shellholder-375-winchester","title":"Lee Precision Case Length Gage with shellholder 375 Winchester 90165","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 375 Winchester 90165\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a set consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit works for the \u003cstrong\u003e375 Winchester\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, when the case has elongated: returning it to the correct length prevents the mouth from hitting the chamber and keeps the crimp consistent. The mouth remains perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 375 Winchester\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 375 Winchester\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90165\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105057627,"sku":"LEE.90165","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_35aa1e18-9f6e-4904-a663-5a7555cd22d7.jpg?v=1775468254"},{"product_id":"lee-precision-case-length-gage-and-shellholder-375-h-h-magnum","title":"Lee Precision Case Length Gage with shellholder 375 H\u0026H Magnum \/ 375 RUM 90164","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 375 H\u0026amp;H Magnum \/ 375 RUM 90164\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shellholder used by Lee Precision to trim cases to size and square their mouths. This unit works with the \u003cstrong\u003e375 H\u0026amp;H Magnum \/ 375 RUM\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has lengthened: returning it to size prevents the mouth from colliding with the cartridge chamber and keeps the crimp consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance. The same unit covers the 375 H\u0026amp;H Magnum and the 375 Remington Ultra Magnum, which Lee groups under the same part number.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 375 H\u0026amp;H Magnum \/ 375 RUM\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 375 H\u0026amp;H Magnum \/ 375 RUM\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90164\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105155931,"sku":"LEE.90164","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_ce13a8ec-ccb2-410c-8696-dbdc091bbff5.jpg?v=1775468256"},{"product_id":"lee-precision-case-length-gage-and-shellholder-444-marlin","title":"Lee Precision Case Length Gage with shellholder 444 Marlin 90151","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 444 Marlin 90151\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to size and square their mouths. This unit works for the \u003cstrong\u003e444 Marlin\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, meaning it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: bringing it back to size prevents the mouth from bumping against the chamber and keeps crimping consistent. The mouth is squared perpendicular to the case axis, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 444 Marlin\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 444 Marlin\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90151\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105188699,"sku":"LEE.90151","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_d20c1dc1-9cb9-4aca-a5ef-cca28db475f8.jpg?v=1775468258"},{"product_id":"lee-precision-case-length-gage-and-shellholder-45-70-government","title":"Lee Precision 45-70 Government Case Length Gage with Shellholder 90152","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 45-70 Government 90152\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a set consisting of a length gauge and a dedicated shellholder used by Lee Precision to trim cases to size and square the mouth. This unit works for the \u003cstrong\u003e45-70 Government\u003c\/strong\u003e: the trim length is determined by the geometry of the gauge, so it does not depend on operator adjustments or readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The set acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. Trimming is performed after full-length resizing, once the case has stretched: returning it to the correct size prevents the mouth from bumping against the cartridge chamber and keeps crimping consistent. The mouth becomes perpendicular to the axis of the case, a condition that affects bullet concentricity. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shellholder dedicated to the 45-70 Government\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 45-70 Government\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90152\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105319771,"sku":"LEE.90152","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_627601cd-3e1b-46d9-8782-508682cb84ca.jpg?v=1775468260"},{"product_id":"lee-precision-case-length-gage-and-shellholder-32-s-w-long","title":"Lee Precision Case Length Gage with shellholder 32 S\u0026W Long 90169","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 32 S\u0026amp;W Long 90169\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gauge and the dedicated shell holder with which Lee Precision trims cases to size and squares their mouths. This unit works on the \u003cstrong\u003e32 S\u0026amp;W Long\u003c\/strong\u003e: the trim length is determined by the gauge's geometry, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gauge: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 32 S\u0026amp;W Long, uniform length is what ensures a consistent crimp: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gauge and shell holder dedicated to the 32 S\u0026amp;W Long\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gauge must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 32 S\u0026amp;W Long\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90169\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105352539,"sku":"LEE.90169","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_f81a3014-7091-4b6d-a018-5ce08e563dab.jpg?v=1775468262"},{"product_id":"lee-precision-case-length-gage-and-shellholder-9x18-makarov","title":"Lee Precision Case Length Gage with shellholder 9x18 Makarov 90684","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 9x18 Makarov 90684\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a combined unit consisting of a length gage and a dedicated shellholder used by Lee Precision to trim cases to size and square the case mouth. This unit is for the \u003cstrong\u003e9x18 Makarov\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage; the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000\/-.015 inches for these units, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 9x18 Makarov, where the length directly affects the headspace and the consistency of the firing cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance. Lee lists this item under the name 9mm Makarov.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 9x18 Makarov\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 9x18 Makarov\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90684\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105450843,"sku":"LEE.90684","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_ed9351cf-af7d-4c42-aeef-52b96863f04c.jpg?v=1775468264"},{"product_id":"lee-precision-case-length-gage-and-shellholder-9-luger","title":"Lee Precision Case Length Gage with shellholder 9mm Luger 90153","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 9mm Luger 90153\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder used by Lee Precision to trim cases to size and square their mouths. This unit works on the \u003cstrong\u003e9mm Luger\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on operator adjustments or readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000\/-.015 inches, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 9mm Luger, where length directly affects headspace and the regularity of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires neither calibration nor maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 9mm Luger\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—one is sufficient for all cartridges with a bullet diameter of less than .475 inches—and is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 9mm Luger\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90153\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105516379,"sku":"LEE.90153","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_627be0c8-9eee-40d0-9268-472f9bc77dd3.jpg?v=1775468265"},{"product_id":"lee-precision-case-length-gage-and-shellholder-38-auper","title":"Lee Precision Case Length Gage with shellholder 38 Super Auto 90217","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 38 Super Auto 90217\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works for the \u003cstrong\u003e38 Super Auto\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the intended length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000\/-.015 inches, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 38 Super Auto, where the length directly affects headspace and the consistency of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping stage uniform. The system is entirely mechanical and requires no calibration or maintenance. Lee lists this item as 38 Super | 38 Auto: the gage covers both designations.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 38 Super Auto\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 38 Super Auto\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90217\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105614683,"sku":"LEE.90217","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_58b7b879-57a1-4e8d-9083-ca59b45186b7.jpg?v=1775468268"},{"product_id":"lee-precision-case-length-gage-and-shellholder-380-acp","title":"Lee Precision Case Length Gage with shellholder 380 ACP 90155","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 380 ACP 90155\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shellholder that Lee Precision uses to trim cases to size and square their mouths. This unit works on the \u003cstrong\u003e380 ACP\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 380 ACP, where length directly affects headspace and the consistency of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires neither calibration nor maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 380 ACP\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 380 ACP\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90155\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105647451,"sku":"LEE.90155","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_3fd7477e-a258-47d1-b1a8-a806cddf20d5.jpg?v=1775468269"},{"product_id":"lee-precision-case-length-gage-and-shellholder-38-s-w","title":"Lee Precision Case Length Gage with shellholder 38 S\u0026W 90156","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 38 S\u0026amp;W 90156\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of a length gage and a dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e38 S\u0026amp;W\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 38 S\u0026amp;W, a uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and the bullet tension changes from shot to shot. The trimmed mouth remains perpendicular to the axis of the case. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 38 S\u0026amp;W\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; you only need one for all cartridges with a bullet diameter of less than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 38 S\u0026amp;W\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90156\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105778523,"sku":"LEE.90156","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_834c9c0b-dc21-4f24-ab28-d843a25df929.jpg?v=1775468272"},{"product_id":"lee-precision-case-length-gage-and-shellholder-38-special","title":"Lee Precision Case Length Gage with shellholder 38 Special 90157","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 38 Special 90157\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e38 Special\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 38 Special, uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the axis of the case. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to 38 Special\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already at the correct size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 38 Special\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90157\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105844059,"sku":"LEE.90157","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_459af60b-4569-4bd7-967d-db5809c33714.jpg?v=1775468273"},{"product_id":"lee-precision-case-length-gage-and-shellholder-40-s-w","title":"Lee Precision Case Length Gage with shellholder 40 S\u0026W 90154","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 40 S\u0026amp;W 90154\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is a unit consisting of a length gage and a dedicated shellholder that Lee Precision uses to trim cases to length and square the case mouth. This unit works with the \u003cstrong\u003e40 S\u0026amp;W\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance for these units of +.000\/-.015 inches, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 40 S\u0026amp;W, where the length directly affects headspace and the consistency of the operating cycle. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 40 S\u0026amp;W\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 40 S\u0026amp;W\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90154\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105942363,"sku":"LEE.90154","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_5ef5e8cb-090a-40bb-bcee-bd04db74961a.jpg?v=1775468275"},{"product_id":"lee-precision-case-length-gage-and-shellholder-10-auto","title":"Lee Precision Case Length Gage with shellholder 10mm Auto 90127","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 10mm Auto 90127\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works with the \u003cstrong\u003e10mm Auto\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee declares a tolerance of +.000\/-.015 inches for these units, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 10mm Auto, where length directly affects headspace and the consistency of the cycling operation. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping stage uniform. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 10mm Auto\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gage: if the case is not cut, it is already at the correct length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 10mm Auto\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90127\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506105975131,"sku":"LEE.90127","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_54f5adf6-0bd8-4f0a-a5bb-1f09566c7d2c.jpg?v=1775468277"},{"product_id":"lee-precision-case-length-gage-and-shellholder-41-remington-magnum","title":"Lee Precision Case Length Gage with shellholder 41 Remington Magnum 90159","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 41 Remington Magnum 90159\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder that Lee Precision uses to trim cases to size and square the case mouth. This unit works on the \u003cstrong\u003e41 Remington Magnum\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance of +.000\/-.015 inches for these units. For a rimmed case like the 41 Remington Magnum, uniform length is what ensures a consistent crimp: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the axis of the case. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 41 Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eMechanical stroke stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already sized\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter of less than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 41 Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90159\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506106106203,"sku":"LEE.90159","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_e9ba4edb-daab-4c4d-b589-0f8019d109c4.jpg?v=1775468279"},{"product_id":"lee-precision-case-length-gage-and-shellholder-44-40-wcf","title":"Lee Precision Case Length Gage with shellholder 44-40 WCF 90168","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 44-40 WCF 90168\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to size and squares the case mouth. This unit works on the \u003cstrong\u003e44-40 WCF\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 44-40 WCF, uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 44-40 WCF\u003c\/li\u003e\n\n\u003cli\u003eMechanical travel stop: repeatable length across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eWorks as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; you only need one for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 44-40 WCF\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90168\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506106138971,"sku":"LEE.90168","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_70eb2e8b-cef1-4e73-83dd-f0bea8212c66.jpg?v=1775468281"},{"product_id":"lee-precision-case-length-gage-and-shellholder-44-special","title":"Lee Precision Case Length Gage with shellholder 44 Special 90160","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 44 Special 90160\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit works on the \u003cstrong\u003e44 Special\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The assembly acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 44 Special, uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the axis of the case. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to 44 Special\u003c\/li\u003e\n\n\u003cli\u003eMechanical stroke stop: length is repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already at the correct length\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes the cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is sufficient for all cartridges with a bullet diameter smaller than .475 inches, and it is used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 44 Special\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90160\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506106237275,"sku":"LEE.90160","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_61829f87-5a7b-475d-9cbc-205710832ace.jpg?v=1775468283"},{"product_id":"lee-precision-case-length-gage-and-shellholder-44-remington-magnum","title":"Lee Precision Case Length Gage with shellholder 44 Remington Magnum 90161","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 44 Remington Magnum 90161\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and the dedicated shell holder used by Lee Precision to trim cases to size and square their mouths. This unit works with the \u003cstrong\u003e44 Remington Magnum\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical for the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shell holder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gage: if the case is not cut, it means it is already within limits. Lee specifies a tolerance of +.000\/-.015 inches for these units. On a rimmed case like the 44 Remington Magnum, uniform length is what makes the crimp consistent: cases of different lengths receive a different closure, and bullet retention changes from shot to shot. The trimmed mouth remains perpendicular to the case axis. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shell holder dedicated to the 44 Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: length repeatable across the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance +.000\/-.015 inches\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gage: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicular to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal—only one is needed for all cartridges with a bullet diameter smaller than .475 inches—and it can be used by hand or with an electric drill. After trimming, it is advisable to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 44 Remington Magnum\u003c\/li\u003e\n\n\u003cli\u003eDedicated shell holder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90161\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506106302811,"sku":"LEE.90161","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_86e76c0d-6f93-4fe7-9fd7-338aed821a34.jpg?v=1775468284"},{"product_id":"lee-precision-case-length-gage-and-shellholder-45-acp","title":"Lee Precision Case Length Gage with shellholder 45 ACP 90162","description":"\u003ch2\u003eLee Precision Case Length Gage and Shellholder 45 ACP 90162\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCase Length Gage and Shellholder\u003c\/strong\u003e is the assembly consisting of the length gage and dedicated shellholder with which Lee Precision trims cases to length and squares the case mouth. This unit is designed for the \u003cstrong\u003e45 ACP\u003c\/strong\u003e: the trim length is determined by the geometry of the gage, so it does not depend on adjustments or operator readings and remains identical across the entire batch of cases.\u003c\/p\u003e\n\u003cp\u003eThe case is held by the shellholder while the cutting tool rests on the gage: the cut stops automatically when the case reaches the specified length. The unit acts as a go\/no-go gauge: if the case is not cut, it means it is already within limits. Lee states a tolerance for these units of +.000\/-.015 inches, reduced to +.000\/-.010 inches for cartridges that headspace on the case mouth, such as the 45 ACP, where length directly affects headspace and cycling consistency. The trimmed mouth remains perpendicular to the case axis, a condition that makes the crimping phase uniform. The system is entirely mechanical and requires no calibration or maintenance.\u003c\/p\u003e\n\u003ch3\u003eMain features\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eLength gage and shellholder dedicated to the 45 ACP\u003c\/li\u003e\n\n\u003cli\u003eMechanical stop: repeatable length for the entire batch of cases\u003c\/li\u003e\n\n\u003cli\u003eLee tolerance of +.000\/-.010 inches for cartridges that headspace on the mouth\u003c\/li\u003e\n\n\u003cli\u003eFunctions as a go\/no-go gauge: if the case is not cut, it is already to size\u003c\/li\u003e\n\n\u003cli\u003eSquares the case mouth perpendicularly to the axis\u003c\/li\u003e\n\n\u003cli\u003eRequires no adjustments or calibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended use\u003c\/h3\u003e\n\u003cp\u003eThe gage must be paired with a Lee cutting tool sold separately: \u003cstrong\u003eCutter and Lock Stud 90110\u003c\/strong\u003e, \u003cstrong\u003eCutter with Ball Grip and Lock Stud 90275\u003c\/strong\u003e, or the \u003cstrong\u003eDeluxe Case Conditioning Combo 92160\u003c\/strong\u003e, which includes a cutter and lock stud, chamfer tool, primer pocket cleaner, and power grip shell holder. The Cutter and Lock Stud is universal; one is enough for all cartridges with a bullet diameter smaller than .475 inches, and it can be used by hand or with an electric drill. After trimming, it is recommended to chamfer and deburr the mouth with the Lee Chamfer Tool 90109.\u003c\/p\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCase Length Gage 45 ACP\u003c\/li\u003e\n\n\u003cli\u003eDedicated shellholder\u003c\/li\u003e\n\n\u003cli\u003eNot included: cutting tool (Cutter and Lock Stud 90110 or equivalent)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer code:\u003c\/strong\u003e 90162\u003c\/p\u003e","brand":"Lee Precision","offers":[{"title":"Default Title","offer_id":51506106401115,"sku":"LEE.90162","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/files\/lee_90111_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_3c4f2479-3517-45e9-8cb1-51dcfff6c416.jpg?v=1775468287"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/5501\/7307\/collections\/reav-masterbenchblockprokit-avmbbpkit-webimage_1-1800x1800-2_b2cb5e0d-7501-4f60-a895-fde16d616124.jpg?v=1784898418","url":"https:\/\/www.planetshooters.com\/en\/collections\/utensili.oembed?page=16","provider":"Planet Shooters","version":"1.0","type":"link"}